Technological Features of Production of Precision Machine Parts Made of Composite Material by Extrusion Method

Yazarlar

  • A.G. Huseynov Huseynov Azerbaijan Technical University (Hussein Javid pr., 25, Baku, AZ 1073, Azerbaijan)
  • V.A. Abbasov Azerbaijan Technical University (Hussein Javid pr., 25, Baku, AZ 1073, Azerbaijan)
  • Ch.M. Mammadov Mammadov Azerbaijan Technical University (Hussein Javid pr., 25, Baku, AZ 1073, Azerbaijan)
  • Sh.N. Asadov Azerbaijan Technical University (Hussein Javid pr., 25, Baku, AZ 1073, Azerbaijan)

DOI:

https://doi.org/10.52171/2076-0515_2024_16_01_31_36

Anahtar Kelimeler:

composite material- extrusion process- precision parts- injection molding machines- thermoplastic automaton- screws

Özet

In the article, in order to increase the efficiency and productivity and accuracy of the extrusion process in the production of precision machine parts made of composite material, in pressure casting machines (extruders) and thermoplastic machines, the working principle and technological losses of nozzles made of brass and copper alloys, equipped with a straight flow nozzle, are revealed. the causes of these losses have been determined.

Downloads

Yayınlanmış

2024-03-30

How to Cite

Huseynov, A. H., Abbasov, V., Mammadov, C. M., & Asadov, S. (2024). Technological Features of Production of Precision Machine Parts Made of Composite Material by Extrusion Method. “Azərbaycan Mühəndislik Akademiyasının Xəbərləri, 16(1), 31–36. https://doi.org/10.52171/2076-0515_2024_16_01_31_36

Sayı

Cilt 16 Sayı 1 (2024)

Bölüm

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Similar Articles

1 2 3 4 5 6 7 8 > >> 

You may also start an advanced similarity search for this article.