Technological Features of Production of Precision Machine Parts Made of Composite Material by Extrusion Method

Authors

  • A.G. Huseynov Huseynov Azerbaijan Technical University (Hussein Javid pr., 25, Baku, AZ 1073, Azerbaijan)
  • V.A. Abbasov Azerbaijan Technical University (Hussein Javid pr., 25, Baku, AZ 1073, Azerbaijan)
  • Ch.M. Mammadov Mammadov Azerbaijan Technical University (Hussein Javid pr., 25, Baku, AZ 1073, Azerbaijan)
  • Sh.N. Asadov Azerbaijan Technical University (Hussein Javid pr., 25, Baku, AZ 1073, Azerbaijan)

DOI:

https://doi.org/10.52171/2076-0515_2024_16_01_31_36

Keywords:

composite material, extrusion process, precision parts, injection molding machines, thermoplastic automaton, screws

Abstract

In the article, in order to increase the efficiency and productivity and accuracy of the extrusion process in the production of precision machine parts made of composite material, in pressure casting machines (extruders) and thermoplastic machines, the working principle and technological losses of nozzles made of brass and copper alloys, equipped with a straight flow nozzle, are revealed. the causes of these losses have been determined.

Downloads

Published

2024-03-30

How to Cite

Huseynov, A. H., Abbasov, V., Mammadov, C. M., & Asadov, S. (2024). Technological Features of Production of Precision Machine Parts Made of Composite Material by Extrusion Method. Herald of Azerbaijan Engineering Academy, 16(1), 31–36. https://doi.org/10.52171/2076-0515_2024_16_01_31_36

Issue

Vol. 16 No. 1 (2024)

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Similar Articles

<< < 1 2 3 4 5 6 7 > >> 

You may also start an advanced similarity search for this article.

Most read articles by the same author(s)