Features of Elastoplastic Deformation Powder Composites of the "Iron Cast" Type

Authors

  • A.T. Mamedov Azerbaijan Technical University (H. Javid ave. 25, Baku, AZ 1073, Azerbaijan)
  • M.Ch. Huseynov Azerbaijan Technical University (H. Javid ave. 25, Baku, AZ 1073, Azerbaijan)
  • B.B. Musurzaeva Azerbaijan Technical University (H. Javid ave. 25, Baku, AZ 1073, Azerbaijan)
  • A.A. Jafarova Azerbaijan Technical University (H. Javid ave. 25, Baku, AZ 1073, Azerbaijan)

DOI:

https://doi.org/10.52171/2076-0515_2023_15_03_71_79

Keywords:

elastoplastic medium, iron, cast iron, discrete character, mathematical model

Abstract

The features of deformation of a powder system consisting of plastic (iron) and elastic (cast iron) particles are considered. To solve the problem of deformation of such a system, the model of continuum mechanics is taken as a basis, although after compaction of a powder medium, it consists of a matrix and pores, which is called a powder or porous medium. In this case, to apply the principle of continuum, the region of space is subdivided into small subregions corresponding to the size of the powder particles. The considered mathematical problem makes it possible to solve the technological problems of pressing the axis of symmetrical products with height transitions.

Downloads

Published

2023-09-30

How to Cite

Mamedov, A., Huseynov, M., Musurzaeva, B., & Jafarova, A. (2023). Features of Elastoplastic Deformation Powder Composites of the "Iron Cast" Type. Herald of Azerbaijan Engineering Academy, 15(3), 71–79. https://doi.org/10.52171/2076-0515_2023_15_03_71_79

Issue

Vol. 15 No. 3 (2023)

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Similar Articles

1 2 3 4 5 6 > >> 

You may also start an advanced similarity search for this article.

Most read articles by the same author(s)