System Analysis and Mathematical Model of Designing Remotely Operated Vehicle Support Vessels
DOI:
https://doi.org/10.52171/herald.333Keywords:
subsea operation, ship design, ROV support vessel, the system analysis, mathematical models, the vessel main dimensionAbstract
A model for studying the scientifically based design of remotely operated vehicle support vessels (ROV support vessel) has been developed, taking the vessel as a functional system with a subsystem of installed hardware. The work proposes theoretical foundations for forming the main dimensions of the vessel. A structural and mathematical model has been formed that describes the formation of the main dimensions of the remotely operated vehicle support vessels (ROV support vessel). A structural and mathematical model for optimizing the main dimensions of the vessel is proposed, taking into account the optimization criteria. A structural and mathematical model has been developed that describes the formation of the surface of the ROV support vessel. Based on the developed structural and mathematical models for forming the main dimensions, the surface of the vessel, a structural and mathematical model has been proposed that describes the functional parameters of the ROV support vessel. As a result of theoretical research, directions for studying the design method described by the structural and mathematical model of the ROV support vessel, reflecting its functional qualities, have been proposed.
References
1. Gaykovich A.I. Osnovi teorii proektirovaniya slojnikh technicheskikh sistem. – SPb.: MORINTEKh, 2001. – 432p.
2. Gaykovich A.I. Theoriya proyektirovaniya vodoizmeshayushikh korabley i sudov. Т1. – SPb.: MORINTEKh, 2014. - 819p.
3. Gaykovich A.I. Theoriya proyektirovaniya vodoizmeshayushikh korabley i sudov. Т2. – SPb.: MORINTEKh, 2014. - 872p.
4. Bashirov R.J. Sistemniy analiz i kriterii optimizacii technologicheskogo oborudovaniya mnogocelevoqo sudna s cranom qruzopodyomnostyu 300t / O.M. Abdullayev // Morskoy Vestnik, - SPb.: 2015. №2, p. 20.
5. Nasirova E.A. Architecture of Modeling Process of Flexible Manufacture System Actions // - Herald of the Azerbaijan Engineering Academy, Baku, 2022. Vol.14. №1, pp. 106-116. DOI: https://doi.org/10.52171/2076-0515_2022_14_01_106_116
6. Ronnov E.P. Proyektirovaniye sudov. – SPb.: Lan, 2022. – 296 s.
7. Voytov D.V. Teleupravlyaemiye neobitayemiye podvodniye aparati. - M.: «MORKNIGA», 2012. – 506 s.
8. Abdullayev O.M. Razrabotka nomoqrammi vibora qlavnikh razmereniy sudov obespecheniya podvodno-tekhnicheskih rabot // XIX International scientific-technical conference on “WATER TRANSPORT PROBLEMS”. Baku: 02 – 03 may, 2024, с. 15 – 17.
9. Abdullayev O.M. Vibor qlavnikh razmereniy sudov obespecheniya podvodno-tekhnicheskih rabot s ispolzovaniyem metoda bazi dannikh // Baku: Proceedings of Azerbaijan State Marine Academy, 2024. №2(40), с.7 – 18.
10. Lebedeva M.P. Algoritm proyektirovaniya sudov obespecheniya podvodno-tekhnicheskih rabot methodom bazi dannikh / O.M.Abdullayev // Nauchniye problem vodnoqo transporta. Voljskiy Gosudarstvenniy Universitet Vodnogo Transporta. - Nijniy Novqorod, 2023, №76(3). – С.32 – 49.
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
